SOLD 24" OD x 7'6" 1440psi 3 Phase

Listing Details

CategorySeparator
Listing ID10130
StatusUnavailable
CertificationUnverified
Year2014
Make/ManufacturerEvolution
ServiceSour
ConditionNew
Vessel Details
Diameter24 Inches
OrientationVertical
Pressure Rating1440 PSI
Vessel detailsDimensions: 24" x 7'6"
Notes

Description: 24" OD x 7'-6" x 1440psi 3 Phase Separator Package (Dressed 2 Phase)

• 24" OD x 7'6" S/S 1440 psi Three (3) Phase Vertical
• Dressed 2 phase.
• Methanol injection system c/w additional injection line to Inlet of separator tubed off skid.
• 2" 600# Inlet/ 2" 600# Outlet/ 2" Liquid lines flanged at vessel connection and NPT from
isolation valves and downstream. (2" future tie in for liquids on gas outlet)
• 2" 600# RF Globe Valve for Back pressure control
• 2" 600# Daniel Junior Meter run AGA 2000 c/w (2) 2" 600# RF Block valves and 1" NPT
bypass/fuel gas take off line. ½" tubing to scrubber/scrubber drain.
• 2-pen Chart recorder c/w (2) ½" NPT FP Ball valves
• 2" NPT Water and Vessel drain lines to combine and run off skid. 2" Plug can be removed on
drain line for LPD.
• Heater Supplied by fuel gas from fuel gas scrubber
• (1) 10,000 BTU Heater c/w heater hood
• Knowledge box mounted on door
• Sight glass drain lines
• Instrument tree to have (1) spare connection plugged for future.
• All venting instruments to be vented off skid.
• 2" polyurethane spray foam on underside of skid.

VESSEL

Tag # Qty Description

V-100 1 24" OD X 7'6" S/S x 1440 Psig MAWP Vertical (NACE)
Manufactured in 2013/14, Constructed with Alberta 3 Phase Design
Inlet deflector plate, 6" Thk. 9lb/ft3 mistex
100°F design temperature, MDMT –20°F @ 1440 Psig A – Stamped
Radiography: RT-1, PWHT
C.A. 1/8"

VESSEL CONNECTIONS

N1 Gas Inlet 1 - 3" NPS 600# RF
N2 Gas Outlet 1 - 3" NPS 600# RF
C1 Drain 1 - 2" NPS 600# RF
C2 Condensate LLC 1 - 2" NPT 3000# TOL
C3 Water LLC 1 - 2" NPT 3000# TOL
C4 Condensate Outlet 1 - 2" NPS 600# RF
C5 Water Outlet 1 - 2" NPS 600# RF C6 a/b LG
- Condensate 2 - ¾" NPT 3000# TOL C7 a/b LG – Water
2 - ¾" NPT 3000# TOL C8 Pl 1 - ½" NPT
3000# TOL
C9 TI 1 - ¾" NPT 3000# TOL
C10 PSV 1 - 2" NPT 3000# TOL
C11 HLSD 1 - 2" NPT 3000# TOL
C12 Inspection 2 - 2" NPT 3000# TOL

INSTRUMENTATION

LC-100 1 FISHER L2 LIQUID LEVEL CONTROLLER
2" NPT process connection
Snap acting control, Direct acting instrument signal NACE Compliant

LCV-100 1 NORRISEAL 2220 LIQUID CONTROL VALVE Part#PN: 390222B087
2" FNPT end connections 3 to 15 Psig input signal
trim size 1"
Air to Open/Fail Closed

BPCV-100 1 2" 600RF DHV Globe Valve
WCB Nace trim

FE-110 1 DANIEL JUNIOR METER RUN
2"-600# Sch. 80 Flanged outer ends Pinned Flow conditioner
Built to AGA 2000
NACE. Process, 100% X-Ray, PWHT
One (1) - 1" 3000# TOL and One (1) ¾" 3000# TOL downstream

Tag # Qty Description

FRC-100 1 ITT BARTON MODEL 202E, 2 PEN FLOW RECORDER
(Reconditioned) 0 to 100" W.C. differential pressure range
0 to 1500 Psig static element
Sour Process pressure boundary parts 24-hr./7 day, battery operated chart drive
Disposable pens. Charts. 5-valve S.S. manifold.

PI-100 1 ELITE PRESSURE GAUGE
4" dia. face x 1/2" NPT bottom mount end connection 0 to 1500 Psig, dual scale, Liquid filled
Sour Service 316 SST

PSV-110 1 MERCER PRESSURE RELIEF VALVE
Model 9100 D Orifice 2" NPT inlet/outlet Set @ 1440 Psig Sour Service

PSV-100 1 MERCER PRESSURE RELIEF VALVE
1" NPT inlet/outlet Model 9100 Set @ 250 Psig
Sour Service
Mounted on fuel gas scrubber

TI-100 1 MASTER TEMP TEMPERATURE INDICATOR
½" NPT back connection, 3" dial, 2" stem
-40 to 160°F range, dual scale
½" FNPT x ¾" MNPT x 6" "U" dimension length 316T thermowell

PCV-1121 1 FISHER 627 HIGH PRESSURE REGULATOR
1" NPT, WCB Steel body
SST trim, Aluminum spring case
3/32" orifice, 70 to 150 psi spring range Max inlet pressure 2000psi

PRV 2 FISHER 67CFR INSTRUMENT GAS REGULATOR
100 / 110 ¼" NPT Tapped-Bonnet
0 to 35 psi, Adjustable Spring Range, Vented bonnet, Sour service

LG-110 1 QUALITY LEVEL GAUGE
One (1) 2500 Psig QISR20 Reflex Mounted on liquid/gas interface Quality gauge valves, NACE
compliant

PI-100 1 ELITE PRESSURE GAUGE
Liquid fill
2½" dia. face x ¼" NPT S.S. end connection 0 to 200 Psig range, dual Scale
Mounted on fuel gas header

Tag # Qty Description

P-300 1 BRUIN CHEMICAL INJECTION PUMP BR5103LP-1111
16.8 gallons/day maximum @ 0-1500 psig
Ductile iron fluid end assembly (SST plunger and trim) Buna Packing & o-rings, sour supply gas trim
Oilless version, micro switch operating valve 3000 Psig maximum discharge pressure
10 to 35 Psig supply pressure 3/8" diameter plunger
¼" NPT suction, discharge and instrument supply

PSV-300 1 SWAGELOK INSTRUMENT RELIEF VALVE SS4R-3A5 SERIES, 316 SST
Body
¼" MNPT Inlet x 1/44" FNPT Outlet Set @ 1400 psig

LG-300 1 PLAINSMAN METERING RATE GLASS
Model 5700, ½" NPT Connection 4'-0" Long

FUEL GAS SYSTEM
GS-100 1 6" x 30" x 250 psig c/w Internal Pesco SST HLSD
1" NPT Inlet, 1" NPT Drain
½" piping to instrument regulators 1/8" C.A.

SKID AND BUILDING SPECIFICATIONS

SK-100 1 SKID BASE, 7'10" W x 12'0" L
Main skid members - 6" WF 15#/ft. 3/16" checker plate floor
(4) Lifting lugs.
c/w 3" sch 80 roll ends for bed loading
½" base plate under vessel

B-100 1 FOAM PANEL BUILDING
8'0" W x 12'0" L with 8'3" Low eave height x 8'9" High eave height Shed style roof
Exterior: 28 GA. ASTM A792 Gr.33 steel to 1.5" polyurethane foam injected panel (R12) Galvalume
exterior/white interior
One (1) 3'0" x 7'0" door c/w IWG window, check chains, panic-lock, and weather-stripping
One (1) 36" x 36" double glazed sliding window
Two (2) 12" x 12" Adjustable Louvers

Tag # Qty Description

H-1150 1 CATADYNE 10,000 BTU/HR BUILDING HEATER
Fuel supply is natural gas (12"x24") WX Series 12 VDC starting element with 30' cables
c/w regulators, grill guard, mertik combination gas control valve, maxitrol safety shutoff, hood
vent.

MANUAL VALVE SPECIFICATIONS

Qty Description

2 2" 600# RF DHV. R.P. Ball Valve (nace compliant)
3 2" NPT 2000# 1 Pc. RP DHV Ball Valves (nace compliant)
2 1" NPT 2000# 1 Pc. RP DHV Ball Valves (nace compliant)
7 1/4" NPT 2000# 1 Pc.RP DHV Ball Valves (nace compliant)
4 ½" NPT 2000# 1 Pc.RP DHV Ball Valves (nace compliant)
2 ½" NPT 3000# 1 .FP DHV Ball Valves (nace compliant)
2 ¾" NPT 2000# 1 Pc.RP DHV Ball Valves(nace compliant)
1 1/2" NPT 3000# Plainsman inline check valve S.S.
1 1/4" NPT 3000# Plainsman inline check valve S.S.

MATERIAL SPECIFICATIONS

Pressure Vessels
Heads SA-516-70-N
Shell SA-516-70-N
Skirt SA-36
Pipe SA-106-Gr.B SMLS
Flanges SA-105-N
Weld Fittings SA-234-WPB

Threaded Piping
Pipe SA-106-B, Sch. XXS/160 SMLS
Threaded Fittings SA-105-N, 3000#

Welded Piping
Pipe SA-106-B, Sch. 80/160 SMLS
Flanges SA-105-N
Weld Fittings SA-234-WPB Threadolets and couplings
SA-105-N
Gaskets 1/8", 316 S.S. Flex.
Bolting SA-193-B7M, SA-194-2HM

Instrument Tubing
Tubing 3/8", ½" 316 sst
Fittings 316 Stainless Steel, Swagelok

Need Help?


Questions? Call us at 1-855-383-5533

Log in to contact Fuelled

Location

Medicine Hat, Alberta

Documents