24" x 10' 1440 PSI 2 Phase Sweet Vertical Separator Package

Description: Dimensions are 13'-8"x5'x5' weigh 5,000

Design Conditions
1. Gas Capacity: 12 MMSCFD
2. Liquid Capacity: 1200 BPD
3. Operating Pressure: 1200 psig
4. Design Pressure: 1440 psig
5. Operating Temperature: 100° F.
6. Design Temperature: -20° to 130° F.
7. Gas Molecular Weight: 22.8 lb/lb-mole
8. Gas Density: 0.1436 lb/ft³
9. Liquid Density: 56.3 lb/ft³
10. Liquid Viscosity: 1.2 cP
11. Corrosion Allowance: 0.125" Separator

Separator, Vertical, 24" I.D. x 10'-0" High (Head Seam to Head Seam), 1440 psig MAWP, 1872 psig Test Pressure, 0.125" Corrosion Allowance. To be designed and constructed in accordance with ASME Code Section VIII, Division 1, of the ASME Code and with the ASME Code Stamp applied. To be registered with the National Board of Boiler and Pressure Vessel Inspectors.
Components:
1 - 4" 600# ANSI RFLWN flanged inlet assembly, with internal deflector assembly
1 - 4" 600# ANSI RFLWN flanged outlet assembly
1 - 4" 600# ANSI RFLWN flanged liquid level switch connection, with internal float protector, set @ 4'-0" above the bottom head seam
1 - 2" 600# ANSI RF flanged relief valve connection
1 - 2" 600# ANSI RF flanged liquid discharge connection
1 - 2" 600# ANSI RF flanged drain connection, with companion blind, studs, nuts and gasket
2 - 2" 600# ANSI RF flanged bridle connections
2 - ¾" 3000# NPT level gauge connections
1 - ¾" 3000# NPT instrument gas connection
1 - ¾" 3000# NPT pressure gauge connection
1- Mist extractor assembly with 4" thick 304 stainless steel wire mesh
1 - Support skirt with base plate
1 - Paint job of above to consist of coat primer paint and coat Fed. Spec. enamel paint

Accessories
1 - Relief valve assembly to include:
1 - Upstream isolation ball valve, 2" NPT body, full port, Balon 2F-F93-SE
1 - Relief valve, 2" NPT body, "F" orifice, set @ 1440 psig, with riser pipe and rain cap
1 - Test ball valve, ½" KF Series W, with plug
1 - Level switch, pneumatic, Norriseal Model 1005P1-1018-VP
1 - 1" Liquid discharge assembly to include:
1 - Upstream isolation ball valve, 1" KF Series W
1 - Liquid discharge valve, 1" NPT body, ½" standard trim, Kimray 1400 SMT PO
1 - Pressure gauge, 0-2000# range, 2 ½" face, stainless steel internals, with isolation needle valve
1 - Level gauge assembly to include:
1 - Level gauge assembly, with Inferno 15A gauge valve set and Inferno R100-16 reflex gauge column
1 - Vent ball valve, ½" KF Series W, with plug
1 - Drain ball valve, ½" KF Series W, with plug
1 - Supply gas and instrument gas assembly to include:
1 - Supply gas isolation ball valve, ½" KF Series W
1 - Supply gas regulator, Meco P125
1 - Supply gas drip pot, Kimray DP-200
1 - Supply gas pressure gauge, 0-200# range, 2 ½" face, stainless steel internals
1 - Instrument gas regulator, Fisher Type 67CR
1 - Instrument gas isolation valve, ¼" KF Series W
1 - Instrument gas pressure gauge, 0-30# range, 2 ½" face, stainless steel internals
1 - Lot 3/8" stainless steel tubing and tube fittings

Skid
Skid, 5' x 5', 6" x 8.2# channel construction, 6" x 15# W-Beam supports